Nesting Boat FAQs

1 : When the ship is traveling, there is an arc, or a circle

If the boat appears to arc or circle, calibrate the compass.

If the boat presses AUTO or drives manually, the yaw is also very large, and if the propeller is not damaged, it means that the left and right deviations of the motor are relatively large, which can be solved by modifying the left and right motor speeds.

2: Abnormal motor noise

When the motor is very noisy, it is the bearing of the motor that seeps water and needs to be replaced.

3: The motor does not turn

Check whether the screw prize is miserable, whether the propeller can be turned manually, if the propeller cannot be rotated, it means that the motor bearing is damaged. If it can be rotated, it may be that the connection wire between the motor and the motherboard is loose, or the motor plug of the motherboard is burned out, contact customer service!

4: Replace the propeller in the wrong direction

The propeller is divided into left and right, pay attention to the distinction when replacing it, and be careful not to install it wrong!

5: Indicate GPS module failure

Check whether the GPS module falls off, if it falls off, you need to find a professional to solder it back.

6: Indicate a fault in the fish finder module

It is generally a part on the motherboard of the fish finder that is burned out and soldered. Troubleshooting can be done by replacing the fish finder motherboard.

7: Water depth is not displayed